Collect more curb side debris with MB Gutter Brooms. Our gutter brooms last long and remain resilient use after use.

• Compatible with most street sweepers and vacuum brooms
• High quality performance at an affordable price

Poly Wafers create a dense brush to completely cover the sweeping pattern surface. They are for routine use where minimal cutting forces are required. The “flicking” action of the poly bristle provides superior cast distance.

Wire wafers create an aggressive brush with additional cutting surfaces such as dirt and ice.

Combo wafers utilize both poly and wire bristles on the same wafer. This gives the best of both materials – poly for flicking and wire for cutting.

(Available in Poly, Wire and Combination Configurations)

• 20” OD x 5” ID
• 21” OD x 6.375” ID
• 25” OD x 6.38” ID
• 32” OD x 10” ID
• 36” OD x 10” ID

Allow for more contact with any surface being swept. They are also an economical choice since there is not a need for spacers.

(Available in Poly, Wire and Combination Configurations)

• 20” OD x 5” ID
• 21” OD x 6.375” ID
• 25” OD x 6.38” ID
• 25” OD x 10” ID
• 32” OD x 10” ID
• 36” OD x 10” ID

Similar to smaller power broom wafers, but with more robust design for the additional load subjected by an airport runway broom. The additional wire ends on a 13# wire wafer, give even more ice and hard pack cutting capabilities.

All MB Tough Brush runway broom wafers are static balanced to within 50 oz –and marked at their heavy spot allowing a balanced core for no broom bounce.

• 36” OD x 10.75” ID Poly
• 36” OD x 10.75” ID 6.5# Wire
• 36” OD x 10.75” ID 8# Wire
• 46” OD x 19.5” ID 8# Poly
• 46” OD x 19.5” ID 10# Poly
• 46” OD x 19.5” ID 10# Wire
• 46” OD x 19.5” ID 12# Wire
• 46” OD x 19.5” ID 13# Wire

• 36” OD x 10” ID Poly
• 36” OD x 10” ID Wire

• 5” ID
• 6.38” ID
• 10” ID
• 10.75” ID
• 19.5” ID